Ketron® LSG CA30 PEEK
symbolic image
- descriptive name: PEEK + carbon fibres, LSG grade, extruded
Physical Properties
| Name | Value | Nominal range | Remark | Method and conditions |
|---|---|---|---|---|
| density | 1.4 g/cm³ | |||
| moisture absorption | 0.16 % | |||
| water absorption | 0.35 % | |||
| Mechanical properties | ||||
| abrasion | 2 µm/m*K | k-Factor | ||
| ball indentation hardness | 310 MPa | |||
| coefficient of dynamic friction | 0.2 | < 0.3 | ||
| compressive strength | 69 MPa | 1 % | ||
| 125 MPa | 2 % | |||
| 170 MPa | 5 % | |||
| flexural strength | 220 MPa | |||
| impact strength | 50 kJ/m² | Charpy, ungekerbt | ||
| 5 kJ/m² | Charpy, gekerbt | |||
| Rockwell hardness (M) | 102 HRM | |||
| Shore hardness (type D) | 90 Shore D | |||
| tensile modulus of elasticity | 9200 MPa | |||
| tensile strength | 144 MPa | |||
| tensile stress at yield | No yield point | |||
| Electrical and magnetic properties | ||||
| surface resistance | < 100000 Ω | |||
| volume resistance | < 100000 Ω | |||
| Thermal properties | ||||
| application temperature | < 250 °C | 20000 h | ||
| < NaN °C | 5000 h | |||
| coefficient of linear thermal expansion | 2.5E-5 µm/m*K | 23 - 100° C | ||
| heat deflection temperature | 260 °C | 1,8 MPa | ||
| melting temperature | 340 °C | |||
| thermal conductivity | 0.92 W/(K*m) | |||
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| chemical resistance | Acids, Weak: vertretbar | |
| Acids, Strong (pH 1-3): beschränkt | ||
| Alkalies, Weak: vertretbar | ||
| Alkalies, Strong (pH 11-14): vertretbar | ||
| Hydrocarbons - Aromatic: vertretbar | ||
| Hydrocarbons - Aliphatic: vertretbar | ||
| Ketones, Esters: vertretbar | ||
| Chlorinated Solvents: vertretbar | ||
| Alcohols: vertretbar | ||
| Continuous Sunlight: beschränkt | ||
| Inorganic Salt Solutions: vertretbar | ||
| Hot Water / Steam: vertretbar | ||
| flammability | V-0 | UL94 |
| oxygen index | 40 % |
Certificates
| Regulation | Remark | Valid until |
|---|---|---|
| 3A-Dairy | nicht konform | |
| USP Class VI | konform |
Producer
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Data Provided by
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
