CeramX® (PE-UHMW | ultrahochmolekulares Polyethylen)
Further informationen can be found here.
symbolic image
- Antriebselemente
- Fördersterne
- Führungsschienen
- Gleitelemente mit hoher Verschleißbeständigkeit
- Gleitprofile, Gleitlager, Gleitschienen
- Komponenten im Nassbereich von Papiermaschinen
- schock- und schlagbeanspruchte Teile
- Transport- und Förderschnecken
- perlweiß
Physical Properties
| Name | Value | Method and conditions |
|---|---|---|
| density | 1.21 g/cm³ | DIN 53479 |
| moisture absorption | < 0.01 % | |
| Mechanical properties | ||
| ball indentation hardness | 49 N/mm² | DIN EN ISO 2039-1, 30s-Wert |
| coefficient of dynamic friction | 0.15 | |
| Shore hardness (type D) | 67 – 70 Shore D | DIN 53505, 15s-Wert |
| tensile stress at break | 35 MPa | |
| Electrical and magnetic properties | ||
| dielectric strength | 45 kV/mm | IEC 60243 |
| surface resistance | 10000000000000 Ω | IEC 60093 |
| Thermal properties | ||
| application temperature | -200 – 105 °C | |
| coefficient of linear thermal expansion | 8 10⁻⁵/K | DIN ISO 11359, 23 °C |
| crystalline melting temperature | 130 °C | Differenz-Thermoanalyse (DTA) |
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| flammability | HB | UL 94 |
Certificates
| Regulation | Remark | Valid until |
|---|---|---|
| FDA 21 CFR 177 | konform |
Producer
Wefapress Beck + Co. GmbH
Daniel Steggemann
02564-9329-35
Request via e-mail
Website | Further details | Material description | Show the materials of Wefapress Beck + Co. GmbH
Data Provided by
Wefapress Beck + Co. GmbH
Daniel Steggemann
02564-9329-35
Request via e-mail
Website | Further details | Show the materials of Wefapress Beck + Co. GmbH
Alle genannten Angaben entsprechen dem heutigen Stand unserer Kenntnisse. Durch die in den Datenblättern enthaltenen Informationen werden bestimmte Eigenschaften weder vereinbart noch zugesichert. Die Entscheidung über die Eignung eines Werkstoffes für ei
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
